Select Page

Building a garage is not a tough task for most people, however for some the process can be frustrating and time-consuming. If you’re one of those people who simply does not know how to build a garage step by step then I’m happy to tell you that I built my garage without any problems. In this article, I’ll be showing you the exact methods that I followed to do so. Just keep on reading because I’ll be showing you the exact procedures as I went about building my garage.

Gather Plans and Codes At the very beginning of how to build a garage, you will have to gather building codes and planning estimates from your local municipal building department. You will also have to check your area s building code regulations. Even though you might have some designs in mind, the building codes of the standard dictate specific height, width, and placement of garage doorways. If you don’t know how to read or even view plans then you might want to look into getting a free garage plan template. This will make it much easier for you to learn how to build a free garage.

Build a garage

Build a Garage Step by Step After you have the free garage plan, the next step in building a garage is to start doing the actual building process. The major part of building a garage is the foundation row. This is where the two sides of the garage door will be attached to. If you’re using a concrete base, the side walls will be cut to fit against the concrete and the roof framing should be installed above this.

Free Parking slab Now that your framework has been set up, the next step is to build the side walls and attach them to the foundation with joists. To create a proper and functional garage, the side walls must be constructed separately from the roof trusses and the roofing shingles. These should all be done on the same day to ensure proper construction.

Build a Garage Door Framing Next, your framework is complete. The next step is to build the frame for the side walls and the roof. The garage door framing must be exact similar to the side wall framing. This will ensure the strength and stability of the garage door.

Roofing and Siding After the side wall framing is complete, the next step in building a garage is to install the roofing and siding. For the roofing and siding, use long boards as you do with the walls to give stability to the roof. Once installed, cover with plywood sheets to make sure the moisture doesn’t penetrate. Also, cover the garage entry way with plywood.

Build a Truss Garage Plan The next step is to build the truss garage plan. A truss garage plan is made by drawing the various components and connecting them in the correct order. For the side wall framing, you need two-car garage kits, one for each car. Connect them and nail them together using long nails. For the roof framing, use two-car garage kits of panels only with rafters. Use cleats under the panels to position them correctly on the roof.

The last step is to assemble the framing and attach the trusses. If you are attaching the trusses to the side of the garage using cleats, secure them with cleat plates under the framework by nailing them onto the trusses using long nails. When framing the trusses, make sure you use identical cleats on both sides. If you have detachments from your detached garage, use stud finder in your area to locate the studs that will guide the cleats through your wall.